Przed kontynuowaniem prosimy zaktualizować przeglądarkę do nowej wersji Edge lub użyć przeglądarki Chrome, Firefox lub Safari. Po 12 marca przeglądarka Internet Explorer nie będzie obsługiwać najlepszych doświadczeń zakupowych w witrynie ADI Digital Branch. close button
Produkty
ADI a Resideo company ADI a Resideo company

GJD GJD397 Repeater D-TECT X

Marka: GJD
ADI #:GJD397 Model #: GJD397  Nazwa: GJD GJD397 D-TECT X Repeater
  • The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500m s in line of sight to the detectors
  • Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
  • As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a'RF Loss' LED switches on and the contact is activated at the receiver
GJD GJD397 Pir W/Less D-Tect X Repeater

Przegląd produktów

Informacje ogólne

500m Wirless Repeater

The D-TECT X Repeater can be used to extend the RF range of a D-TECT X detector, or to boost signal in a poor reception area.

The D-TECT X Repeater must be placed within 500 metres line of sight between the D-TECT X detector(s) and D-TECT X Receiver(s). The unit will repeat all signals from D-TECT X detectors within range and as such does not require any programming to function.

Główne cechy
  • The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500m s in line of sight to the detectors
  • Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
  • As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a'RF Loss' LED switches on and the contact is activated at the receiver
  • An RF continuity test mode facility tests the strength of the RF signal from each detector at the receiver location. When it is necessary to conduct a site survey prior to installation, the receiver can be powered temporarily with a PP3 9 V battery
  • The D-TECTxreceiver is powered by a 12 - 24V AC/DC supply
  • The D-TECTxreceiver is supplied as standard with a 4 channel module pre-installed. There are also expansion slots which will accommodate up to 3 additional 4 channel modules giving a total of 16 channels. Therefore the receiver is able to control and monitor up to 16 D-TECTxdetectors
  • An expansion module is connected via the ribbon connector to the circuit board of the pre-installed 4 channel module and is simply slid into the next available mounting slot in the receiver enclosure
  • An expansion module is connected via the ribbon connector to the circuit board of the pre-installed 4 channel module and is simply slid into the next available mounting slot in the receiver enclosure
Informacje
Kategoria : Centrale alarmowe i klawiatury, Produkty, Repeatery sygnału bezprzewodowych central alarmwych, Systemy alarmowe

Specyfikacje

Informacje ogólne

ADI Numer katalogowy
GJD397
Linia produktów
D-TECT X
Model produktu
GJD397
Nazwa marki
GJD
Nazwa produktu
Repeater sygnału urządzenia zabezpieczającego D-TECT X
Numer czesci producenta
GJD397
Producent
GJD Manufacturing
Typ produktu
Repeater sygnału urządzenia zabezpieczającego
Waga (przyblizona) (g)
658

Charakterystyka fizyczna

Glebokosc
75 mm
Glebokosc (mm)
75
Szerokosc
180 mm
Szerokosc (mm)
180
Waga (przyblizona)
658 g
Wysokosc
210 mm
Wysokosc (mm)
210
Zastosowanie/uzycie
System sygnalizacji

Opis zasilania

Napiecie wejsciowe
12-24V AC, DC
close button